- 4X32 Mini Mil-Dot Airgun Scope with Sun Shades
- 4 X Magnification & 32 mm Scope Aperature
- Range Estimating with Mil-Dot Feature
- TubeDiameter of 1 Inch
- Rugged One Piece TubeConstruction for All Terrains and Weather
- Sealed Windage and Elevation Housing
- Elevation / Windage Adjustment w/ Finger Adjustable Turrets
- Dynamic and Compatible with All Airsoft Usage or Needs
- Perfect Entry Level Magnifying Mil Dot Scope for Airsot or Air Guns
- Range estimating requires common knowledge/experience about your target’s
actual width or height.
- 1 mil in a scope reticle is the distance from the center of one dot to the
center of the next dot.
- Set your scope at the highest power. View the target through the scope.
Place the center of the dot against one edge of the target and measure to
the opposite edge of the target.
- Once the target has been measured in mils, use one of the formulas below
to estimate the distance of the target: (Refer to the product specs table
for correct formula of each model.) For example, based on past experience,
the length of a known animal from shoulder to tail is 40 inches (1.016 meters),
and we see through our mil-dot scope to find that it occupies 5 mils. Therefore,
the distance using Formula A = (1.016 x 1,000) / (2 X 5) = 101.6 meters (110
yds)
NOTE: (1 M = 1.0936 Yards)
- Scopes come with range estimate tables for easy reference.
| Formula A |
(Height
or Width of Target in Meters) x 1,000 |
= Range in Meters |
2 x (Height
or Width of Target in Mils.) |
| Formula B |
(Height
or Width of Target in Meters) x 1,000 |
= Range in Meters |
Height or Width
of Target in Mils. |
| Formula C |
(Height or Width of
Target in Meters) x 333 |
= Range in Meters |
Height or Width of Target
in Mils. |
